Upload your article
If the BIOS firmware is corrupted, there are a number of troubleshooting steps you can try to Bios Guy the corrupted BIOS. If your motherboard has a BIOS backup, you can boot into the BIOS backup and flash the corrupted BIOS. If your motherboard does not have a BIOS backup, others can replace you.the BIOS chip. However, in some cases, the only option may be to completely replace the motherboard. WikiHow will show you how to fix a corrupted BIOS.
This article was ultimately written by Travis Boyles. Travis Boyles is a technical writer and editor for wikiHow. Travis has experience in technology product manufacturing, client software systems delivery and graphic design. It specializes in Windows, macOS, Android, iOS and just Linux platforms. He studied graphic architecture at Pikes Peak Community College.
1Check if your personal device is under warranty.
Before trying to repair it yourself, make sure your computer is actually under warranty. In many cases, simply opening the laptop will void the warranty. If your computer or laptop is still under warranty, we recommend that you contact your reseller or manufacturer and have your computer repaired by them.
- If you collectcomputer yourself, you can check if your custom motherboard is covered by the warranty.
How much does it cost to fix BIOS?
BIOS chip repair cost in India? Resetting or flashing the BIOS, programming, replacing the chip or microchip costs 1600 rupees, laptop freezes with the chip program erased, reinstallation continues.
2Boot from a BIOS backup (Gigabyte motherboards only).
Can you fix a corrupted BIOS?
According to real users, you canSolve the corrupted BIOS problem by simply removing the wide array from the motherboard. Removing the battery will reset the BIOS settings to default and can often solve the problem.
Some Gigabyte motherboards have a BIOS backup on the motherboard. If the main BIOS is corrupted, you can boot from a backup BIOS that will automatically flash the BIOS if something goes wrong. If the BIOS backup absolutely doesn’t boot right away, you can do one of the following to force it to boot from a commercially available BIOS backup:
- Method 1: Turn off your computer. Then press and hold the media channels and the power button until the computer finally turns back on. Hold down the power button until the computer turns off a lot more. When enabled, it should boot from the primary backup BIOS.
- Method 2: Turn off your computer. Also, press and hold the power button and reset button for about 10 seconds and then just release them.When you turn on your home computer for the third time, it should boot from the BIOS backup.
- Method 3: Use this method once as a last resort. If you are unable to boot your Gigabyte motherboard into a BIOS backup using one of the two methods above, you will need to open your computer and access the motherboard directly. Look for a specific chip labeled “m-BIOS” or “Main BIOS”, maybe something similar. Use a wire or paperclip to short-circuit pins 1 and 6 of the microprocessor. If there is a triangle symbol or a red dot, it is followed by pin 1 (usually bottom right). Pins 1, 2 and 3, 5 are in the same position. Pin 5 is opposite pin 4, and pin is slightly next to pin Step 5. Place a paperclip or a small piece of wire over pins 5 and 6 and hold it firmly (gently touch the sturdy aluminum before touching the inside of the motherboard). .) Have someone turn on the computer. Remove the paperclip or wire, if you listen carefully, it will beep. This may cause your computer toter will boot with a shared BIOS backup.
3Remove the central graphics card.
What to do when computer can’t boot past BIOS?
If the computer still cannot boot after BIOS, continue to the next fix. Some BIOS settings may be changed incorrectly, causing conflicts with the system and preventing the BIOS from checking them when the computer starts up. An effective solution in this case is to simply reset the BIOS settings to their default values. Restart your computer.
Some users have reported that BIOS issues can be resolved by removing this dedicated graphics card and connecting their computer to the integrated Layouts card.
- Warning. When performing internal repairs on your computer, make sure it is turned off. Be sure to keep your hand on something metallic outside of the computer, or wear an anti-static wrist strap to stay grounded. This prevents static electricity from causing permanent damage to your computer.
4Reset the BIOS.
In some cases, you may be able to resolve corrupted BIOS issues by resetting the BIOS settings. You can do it in a connected way:
- Three. Boot into BIOS and reset to factory settings. If you can boot into the BIOS, proceed. Find the appropriate option “Load default settings”, “Restore factory settings” orsomething like. Select this option to reset BIOS settings.
- Remove the CMOS battery from the system board. Unplug your computer and computer case to access a specific motherboard. This is the motherboard to which all cables, chips and computer cards are attached. Locate the CMOS battery. This is usually a CR2032 type battery, which is about a quarter high. Carefully remove the battery and let it sit for 20 minutes. If your software is for a laptop, also remove part of the laptop battery. If this solution does not solve the problem, try replacing the battery with a good one.
- Reset the jumper. This is usually done on older motherboards. Shut down the computer and open someone’s computer case to access the motherboard. Look for a connection cable labeled “CMOS” or something similar. The jumper is placed on two three-pin outputs. Also remove the jumper and replace it with a set similar to the pins. Press and hold, then press the human power button for about 15 seconds. returnjumper to its original position.
How do I fix a stuck BIOS screen?
Remove the existing DVD/CD or disable the USB port if this is the case. Access the calculator’s BIOS settings, which are pasted on the BIOS film. Change the boot order to create a computer from a USB stick or CD/DVD. Insert the DVD/CD of the problem PC or connect a bootable USB drive.
5Update the BIOS.
In some cases, truly corrupted BIOS problems can be resolved by updating the BIOS. Make sure your computer has a constant power source when customers update their BIOS. If the update process is interrupted, it will easily cause permanent damage to your computing device. You need to determine which BIOS version you will definitely be using. Use the following measures to update the BIOS:
- Find out which BIOS version you are building. If you can boot into your BIOS, it will probably tell you which BIOS version is running. If you can start Windows, click the current Windows Start menu, then click System Information and open the System Information app. Which test version in the BIOS to run next and “BIOS version / date”. If you can’t boot into the BIOS, or maybe even Windows, you probably won’t be able to update the BIOS.
- Visit your computer manufacturer’s website. If necessary, you can train from a separate laptop.
How do I fix the BIOS on my computer?
Check if your computer is under warranty.
Boot from the secondary BIOS (only for Gigabyte motherboards).
Remove this dedicated graphics card.
Update your BIOS.
Replace BIOS chip.
How to fix a corrupted BIOS chip?
Firmly insert the damaged BIOS chip into the slot that will appear on the working motherboard. Again, be careful not to touch anything metallic. Flash a corrupted BIOS by following the instructions in How to update your computer’s BIOS. Cross your fingers and computer. If this worked, reinstall a working BIOS chip on the motherboard.